Other Accessories: Difference between revisions
Jump to navigation
Jump to search
(Created page with "== Other Accessories ==") |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
== | === 1. Khadas USB Extension === | ||
The files for fabricating the plastic cover and the USB Extension itself are listed as below: | |||
{| class="wikitable" | |||
|+Hardware Design and Fabrication Files | |||
!No. | |||
!Name | |||
!Description | |||
!Update Date | |||
!Download | |||
!Note | |||
|- | |||
|1 | |||
|BR01-USB_EXT | |||
|The Gerber files and BOM for fabricating the USB extension. | |||
|07/13/24 | |||
|[https://wiki.bruce-op.com/uploads/Other_Accessories/USB_EXT/Gerber-BR01-KHADAS_USB_EXT071324.zip Link] | |||
|Make sure to use the correct type of USB connector. | |||
|- | |||
|2 | |||
|BR01-USB_EXT_COVER_R | |||
|The 3D model of the cover parts on the right USB extensions. | |||
|07/13/24 | |||
|[https://wiki.bruce-op.com/uploads/Other_Accessories/USB_EXT/BR01-USB_EXT_CAP.STEP Link] | |||
|These parts are essential as they fix the USB connector in place. | |||
|- | |||
|3 | |||
|BR01-USB_EXT_COVER_L | |||
|The 3D model of the cover parts on the left USB extensions. | |||
|07/13/24 | |||
|[https://wiki.bruce-op.com/uploads/Other_Accessories/USB_EXT/BR01-USB_EXT_CAP_L.STEP Link] | |||
|These parts are essential as they fix the USB connector in place. | |||
|- | |||
|4 | |||
|BR01-USB_EXT_COVER_R | |||
|The 3D model of the back parts on the board edge USB male plug. | |||
|07/13/24 | |||
|[https://wiki.bruce-op.com/uploads/Other_Accessories/USB_EXT/USB_EXT_INSERT.STEP Link] | |||
|Glue this part on the back of the board edge USB male plug | |||
|- | |||
|5 | |||
|Screw | |||
|Flat M4x18 | |||
|07/13/24 | |||
|N/A | |||
|Replace the original flat head screw | |||
|} | |||
Latest revision as of 01:04, 13 July 2024
1. Khadas USB Extension
The files for fabricating the plastic cover and the USB Extension itself are listed as below:
| No. | Name | Description | Update Date | Download | Note |
|---|---|---|---|---|---|
| 1 | BR01-USB_EXT | The Gerber files and BOM for fabricating the USB extension. | 07/13/24 | Link | Make sure to use the correct type of USB connector. |
| 2 | BR01-USB_EXT_COVER_R | The 3D model of the cover parts on the right USB extensions. | 07/13/24 | Link | These parts are essential as they fix the USB connector in place. |
| 3 | BR01-USB_EXT_COVER_L | The 3D model of the cover parts on the left USB extensions. | 07/13/24 | Link | These parts are essential as they fix the USB connector in place. |
| 4 | BR01-USB_EXT_COVER_R | The 3D model of the back parts on the board edge USB male plug. | 07/13/24 | Link | Glue this part on the back of the board edge USB male plug |
| 5 | Screw | Flat M4x18 | 07/13/24 | N/A | Replace the original flat head screw |