Other Accessories - Revision history

Xzhang: /* BR01 Foot PCB */

2026-03-26T04:23:05Z

BR01 Foot PCB

← Older revision		Revision as of 21:23, 25 March 2026
Line 45:		Line 45:
	\|Replace the original flat head screw		\|Replace the original flat head screw
	\|}		\|}

			=== 2. BRUCE V1.6 Foot PCB ===
			The PCB design and fabrication files of the contact sensor on the foot can be downloaded following [https://wiki.bruce-op.com/uploads/Other_Accessories/BR01-FOOT-PCB.zip this link].

2024-07-13T09:04:50Z

1. Khadas USB Extension

← Older revision		Revision as of 02:04, 13 July 2024
Line 14:		Line 14:
	\|The Gerber files and BOM for fabricating the USB extension.		\|The Gerber files and BOM for fabricating the USB extension.
	\|07/13/24		\|07/13/24
	\|		\|[https://wiki.bruce-op.com/uploads/Other_Accessories/USB_EXT/Gerber-BR01-KHADAS_USB_EXT071324.zip Link]
	\|Make sure to use the correct type of USB connector.		\|Make sure to use the correct type of USB connector.
	\|-		\|-
	\|2		\|2
	\|BR01-~~USB_EXT_COVER_SET~~		\|BR01-USB_EXT_COVER_R
	\|The 3D model of the cover parts on ~~the left and~~ the right USB extensions.		\|The 3D model of the cover parts on the right USB extensions.
	\|07/13/24		\|07/13/24
	\|		\|[https://wiki.bruce-op.com/uploads/Other_Accessories/USB_EXT/BR01-USB_EXT_CAP.STEP Link]
	\|These parts are essential as they fix the USB connector in place.		\|These parts are essential as they fix the USB connector in place.
			\|-
			\|3
			\|BR01-USB_EXT_COVER_L
			\|The 3D model of the cover parts on the left USB extensions.
			\|07/13/24
			\|[https://wiki.bruce-op.com/uploads/Other_Accessories/USB_EXT/BR01-USB_EXT_CAP_L.STEP Link]
			\|These parts are essential as they fix the USB connector in place.
			\|-
			\|4
			\|BR01-USB_EXT_COVER_R
			\|The 3D model of the back parts on the board edge USB male plug.
			\|07/13/24
			\|[https://wiki.bruce-op.com/uploads/Other_Accessories/USB_EXT/USB_EXT_INSERT.STEP Link]
			\|Glue this part on the back of the board edge USB male plug
			\|-
			\|5
			\|Screw
			\|Flat M4x18
			\|07/13/24
			\|N/A
			\|Replace the original flat head screw
	\|}		\|}

2024-07-13T08:16:47Z

Other Accessories

← Older revision		Revision as of 01:16, 13 July 2024
Line 1:		Line 1:
	== ~~Other Accessories~~ ==		=== 1. Khadas USB Extension ===
			The files for fabricating the plastic cover and the USB Extension itself are listed as below:
			{\| class="wikitable"
			\|+Hardware Design and Fabrication Files
			!No.
			!Name
			!Description
			!Update Date
			!Download
			!Note
			\|-
			\|1
			\|BR01-USB_EXT
			\|The Gerber files and BOM for fabricating the USB extension.
			\|07/13/24
			\|
			\|Make sure to use the correct type of USB connector.
			\|-
			\|2
			\|BR01-USB_EXT_COVER_SET
			\|The 3D model of the cover parts on the left and the right USB extensions.
			\|07/13/24
			\|
			\|These parts are essential as they fix the USB connector in place.
			\|}

2024-07-13T08:06:21Z

Created page with "== Other Accessories =="

New page

== Other Accessories ==